Single Player First Person Shooter Maps and Mods for Half-Life 1, 2 and Episodes 1, 2 and 3

Welcome to Challenge Number 10.

If you don’t know what the Challenge Series 2009 is all about, please read the Introduction.

Onto the tenth and final challenge (at least for this year).

The Challenge

I challenge you to play one difficulty level higher than you usually do. Don’t worry, if you always play on HARD I have a trick for you.

Why

There’s a phrase that sports players often use and that is “Always play with players that are better than you“. It’s wrong, for a number of reasons, the primary one is that if everybody did that nobody would agree to play with anybody. But it’s always good to play with people better than you, if you can.

Clearly, playing on a higher level is challenging and if done occasionally then it can certainly improve your skill. The key is to do it at selected times and with mods that you find easy, otherwise it can be too frustrating and have a negative effect.

How

It’s not exactly Rocket Science. Just go to the options page on the main menu of whatever game or mod you are playing and select the next level up.

Play for as long as possible but not until you are frustrated. Think of it like any new form of exercise; don’t do it for too long for the first time and take breaks when you get tired.

I recommend you read the next part even if you normally play on Easy or Medium because it contains a potentially fun hack for you to try.

Harder than Hard?

Part of the reason for this challenge being a little late is I took longer than expected to find an answer. I was convinced it would be easy to find but it wasn’t – as always it helps if you know what you are looking for.

What you will do is create a simple text file that will contain commands that override the settings of the enemies health and the weapons strength. I don’t claim to be an expert and there might be a much better/easier/faster/more elegant way to do it, but I tried it and it works.

Create a text file with a .cfg extension, I called mine myskill.cfg. Which was stolen from the Synergy Mod WIki – Thanks guys.

I highly recommend you use mine as a template, but you could easily start from nothing if you know what you are doing. The file can be edited in any text editor – NOT word processor but TEXT editors (Notepad etc). Each line contains an item and its value. Let’s look at a few examples:

// Zombie
sk_zombie_health “100″
This should be clear enough. It’s the health a zombie starts with.
sk_zombie_dmg_one_slash “10″
How much damage a zombie does with a single slash.
sk_zombie_dmg_both_slash “25″
How much damage a zombie does with a double slash.

Now, adjust those numbers to suit your skill and preference and copy it into the same folder as the config.cfg file of the game or mod you are playing.

Launch the game or mod and bring up the console (see my How To.. guide for help).

In the console, type exec myskill (or whatever you named your file) press enter or click submit. Nothing should happen, at least nothing you can see.

From this point onwards the enemies and weapons will have the values you specified in the myskill.cfg file. Adjust those values to your hearts’ content. (If you pause mid-game and edit the file, I believe you have to execute the file again before it will work with the new values)

There may be many other options you can use but the ones in my template should be enough to get you started.

Once you restart your game or mod the default values will return. They only take effect when you manually execute the file via the console. It’s probably possible to have it run via commands in the launch options of the games or mods, but I haven’t tried it.

All of these options can be typed into the console directly and used individually, but that seems like a lot of trouble unless you are having problems with a particular section of a map or mod.

Harder or easier?

The great thing about this technique is that you can create various custom difficulty levels to suit your likes and dislikes. For example, I made all the headcrabs and their variations have a health of 1, meaning they die with just one hit, I then made the Combine Soldiers have a health of 100 making them harder to kill.

Don’t forget about yourself.

You can even adjust your suit’s capacity, charging stations, amount of health per kit etc. So, don’t just think it’s a one way street. You can make your enemies harder and/or your health lower.

Interesting Combinations

Please feel free to share your values and settings. Maybe we can create a small collection of fun or challenging settings that we all try and comment on.

It’s such a shame this can’t be done in-game with a proper menu but it’s not that hard to do manually.

Your Experiences

Don’t forget a major part of the challenge series is to share our experiences. Don’t let my questions limit you but here are some to get you started:

  • How long did you first session last?
  • Was the second time easier?
  • Did it change your playing sytle much?
  • Once the challenge is over will you continue playing on the higher level?
Published

19th November 2009

Categories
Get the most from the comments
Follow these comments by RSS feed
9 Comments
  1. Gman-ghost 6393 comments

    19th November 2009

    I tried that with a mod, Afraid of Monsters, and boy it does make a difference. First time, was on Medium, as I usually play almost any new game or mod with this difficulty, and then changed to Easy, just for the fun, and then to hard again, it was almost not possible to get past the first level on the most difficult setting, the monsters did a real big damage, and the ammo and other resources really were limited.

  2. Grey Acumen 505 comments

    20th November 2009

    I always make a point of playing any new game or mod on the normal difficulty. I actually never had any intention of changing that until I found out that the assassins from half life get invisibility while not moving on hard difficulty. Now I plan on eventually playing through all the steam games on the higher difficulties.
    That's the type of thing I really enjoy; when changing the difficulty actually changes how enemies act and what abilities you're facing up against, and not just simply having them do and take more damage before dying. That's simply frustrating.

  3. wayfare 6393 comments

    20th November 2009

    Anymore I start all the games I play on hard, I need to stop for the replay value though. Phillip, I thank you for showing me how to ramp up the difficulty.. it should give me the reason to run through Half-Life 2 yet again.. I might try to figure out how to bring down the damage that my own weapons inflict as well, I will let you know how that works out if I decide to do so. I really like the idea of cutting barnacles health down.. does anyone else agree that it takes too much ammo to kill them?

    • Hypnotek 9 comments

      20th November 2009

      To lessen the damage your weapons do you can add a line like this to your cfg file. "sk_plr_dmg_smg1 4" This would change the damage for your smg to 4 per shot. You can interchange smg1 and 4 with whatever values you like, although you may need to lookup the weapon variables so you know what to use.

    • Jasper 677 comments

      20th November 2009

      Yes, and the denizens of Ravenholm outside of Ravenholm. In Ravenholm, fair doos.

  4. Jasper 677 comments

    20th November 2009

    Did this with HL2 Highway17 and Sandtraps up to the Lighthouse.
    Hardened everything Combine but left the Antlions and Gordon "as is’
    Brilliant!
    Beat the Gunship after the crane with just 2% life left. Phew!

    How long did you first session last? About 3 times as long as it would on Hard. Great, harder and longer game play.

    Was the second time easier? Hang on a minute, I'm still getting over the screaming heebie-jeebies from the first time!

    Did it change your playing style much? Not tactics because that is my way anyway, whenever possible.
    There's a lot of Gun & Run and Drive & Crunch so you have to be much sharper or die (which I did, lots).

    I'll be using Myskill.cfg many more times to re-enliven older maps and mods – but not for Minerva Metastasis or Strider Mountain They're quite hard enough already but Myskill.cfg could be handy to soften up the zombies.

    To get Myskill.cfg absolutely right is going to take experience.
    I think it is important that mods and maps should be played as the developer intended in the first instance of hard skill. Thereafter, fair game

    Not sure that I would want to combine this with no personal saves.
    A great find. Thanks for that Phillip.

  5. stoopdapoop 6393 comments

    27th November 2009

    This one looks fun. I just got back from vacation and have a lot of work to catch up on, but after that I'll give this a go.

  6. Sharpentine 6393 comments

    28th October 2010

    there are easier ways to do this with certain commands:

    sk_dmg_inflict_scale1 1.50

    sk_dmg_inflict_scale2 1.00

    sk_dmg_inflict_scale3 0.75

    (how much demage you inflict on enemies)

    sk_dmg_take_scale1 0.50

    sk_dmg_take_scale2 1.00

    sk_dmg_take_scale3 2.0

    (how much demage you receive from enemies)

    sk_ammo_qty_scale1 1.20

    sk_ammo_qty_scale2 1.00

    sk_ammo_qty_scale3 0.60

    (how much ammo you find)

    Numbers represent EASY (1), NORMAL (2) and HARD (3).

    The scales only affect enemies, you still do normal demage against crates, explosive barrels and scenery.

Post a comment